Dulux Quick Dry Satinwood is ideal for use on wood indoors.
With its anti-yellowing, low odour formulation it is convenient and pleasant to use.
Dulux Quick Dry Satinwood is drip resistant and does not require an undercoat
From the Manufacturer
Satinwood Almond White
Dulux Quick Dry SatinwoodDulux Quick Dry Satinwood is ideal for use on wood indoors. With its anti-yellowing, low odour formulation it is convenient and pleasant to use. Dulux Quick Dry Satinwood is drip resistant and does not require an undercoat
Coverage: Up to 16m²/litre
Scrape: Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information.
Clean: Make sure the surface is clean (no dirt or grease) and dry.
Seal: If a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with a suitable knotting solution. If the surface is damaged, repair using the appropriate Polycell product. When painting radiators, make sure that they are cold.
Drying time :6 hours
Stir: Stir thoroughly before use to ensure the paint is completely mixed.
Apply: Apply 2 coats with a brush, leave at least 6 hours between coats, longer when cold and damp.
TIP: if the colour change is strong, more coats may be required.
Dry: Leave 6 hours to dry. Newly painted doors and windows should not be closed and radiators should not be heated until paint is fully dry
Clean: Remove paint from the brush or roller with a cloth and then wash with water.
Store: Store paint in dry conditions and protect from extreme temperatures.
Recycle: Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
|Product Type||General Paints|