NitroMors is the UK's number 1 paint and varnish remover brand.
It promises to breakdown the oldest and toughest paint or varnish with minimal effort.
- Pour NitroMors into an overcap. Replace cap immediately. Apply a thick coat by by brush with dabbing action. Do not brush out. Only apply to areas up to 0.5m2. When paint has blistered (5-10 mins) apply second coat, working into blisters. Leave 40 mins. Do not allow to dry.
- Remove blistered/ softended paint with scraper or shavehook. Repeat process if necessary. Remove traces of stubborn paint by rubbing with wire wool dipped in NitroMors.
- Wash down with detergent in cold water (use white spirit on fine woods to avoid raising the grain). Allow to dry throughly and rub down with fine sandpaper or wire wool.
|Dimensions||10.4 x 4.5 x 15.7|