Dulux Feature Walls is a range of striking and intense colours that are available in a contemporary Matt finish which have been specially selected to work well with creams or neutrals.
From the Manufacturer
Coverage: Up to 13m²/litre
Remove loose or flaking material.
Make sure the surface is clean (no dirt or grease) and dry.
If new, bare and absorbent surface, seal with this product, thinned 10% with water, or if very porous, use Dulux Sealer for Plaster. If the wall is damaged, repair using the appropriate Polycell product.
Drying time: 2-4 hours
Stir to ensure paint is completely mixed.
TIP: in hot environments, thin 10% with water if necessary.
Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or in extreme temperatures. TIP: if the colour change is strong, more coats may be required. If you use more than one can, mix them together in a large container or finish in a corner before starting a new can.
Leave 2-4 hours to dry.
Remove paint from the brush or roller with a cloth and then wash with water.
Store paint in dry conditions and protect from extreme temperatures.
Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
|Colour||Reds, Pinks & Violets|
|Product Type||General Paints|