Product Image
Chillipeeps Teat
Product Details
Description
Chillipeeps is the multi-award winning teat that solves a common problem many people experience when out and about with young hungry babies and no clean sterilised bottle to use, by allowing a teat to be attached directly to a carton to feed your baby, and many mineral water bottles to enable you to rehydrate your baby.
Suitable for ready-made formula milk cartons and bottled mineral water that contain less than 200mg of Sodium (Na) per litre. (To prevent tooth decay only give milk and water)
The teat is stored in a pod and is easy to attach, use, remove, clean and sterilise ready for the next drink.
- Vari-flow teat, that obtains slow, medium and fast flow rates
- BPA Free
- Dishwasher safe
- Complies with EN 14350.
- Chillipeeps Teat Adapter is made in Britain. Silicone teat is made by Canpol Babies
- Perfect for on the go!
- Suitable from 3+ months
Overall Winner of the BPA Concept & Innovation Award 2009
Instructions for use
1 - Before first use place in boiling water for 5 minutes to ensure hygienically clean.
2 - Wash with warm soapy water, and rinse well before each use. Sterilise in solution only.
3 - Do not turn teat inside out for cleaning as damage could result.
4 - The teat is a vari-flow teat that can obtain different flow rates: slow I, medium II and fast III, by placing the teat with the I, II or III sign towards the baby's nose.
5 - For cartons: remove bottom pod, ensure carton is clean, gently pierce and screw in. do not over tighten onto the carton, this could break the seal with the carton and cause leakage
6 - For bottles: remove the bottom pod and bottom plate with screw thread and attach directly to the bottle.
Full Specification
| Size | ONE |
| Colour | Green |
| Accessories Included | Includes protective storage pod and adaptors to either screw into cartons of formula milk or screw onto bottled mineral water |
| Additional Features | Vari-flow teat, that can obtain different flow rates: slow I, medium II and fast III, by placing the teat with the I, II or III sign towards the babies nose |
| Assembly Required | No |
| Brand | Chillipeeps |
| Dimensions | 10.5 x 5 x 5cm |
| Material | Silicone |
| Minimum Age | 3+ Months |
| Range | Baby Feeding Accessories |
| Safety Certificate | EN 14350 |
| Safety Notes | Please follow directions and warnings on the packaging and retain for future reference. Never leave babies or small children unsupervised while feeding. Never use feeding teats as a soother. Clean before each use. It is recommended to replace the teat after every 2 months of use. |
| Type | Teat |
| Weight | 0.0402 |





